This manual contains all the contents of YCC365 PLUS, how to add it, how to set up the functions of YCC365 PLUS cameras, etc. continuously updated.
This guide applies to YCC365 and YCC365 PLUS cameras.
YCC365 PLUS APP download
YCC365 PLUS supports Android and iPhone, you can download it from google play or app store.
Register your account and login
Log In Open the app, and log in with your YCC365 PLUS. If you don’t have an account, create one first.
How to connect YCC365 PLUS camera
YCC365 Plus camera has three connection methods, you can choose any one of them.
Scan code to add
Camera pair with Wi-Fi by scanning QR code on the mobile phone.
1. Click the ‘+’ icon, select Intelligent camera > Scan code to add
2. Connect the YCC365 Plus camera to the power supply, then wait for the camera to start, when the camera issues a voice prompt, click Next.
(If the camera does not support voice intercom, please check the indicator)
Note
If the camera does not issue a voice prompt, please reset the camera.
3. Enter your wifi password, and make sure your wifi name and password are correct, then click Next.
It is recommended to connect 2.4G wifi, some cameras only support 2.4G wifi, and 2.4G wifi distance is far.
4. Let the camera scan the displayed QR code, when the camera makes a ticking sound, it means the scan is successful, please click You hear a tone or the indicator light. (Did not hear the voice prompt?)
5. Wait for the camera to connect to the wifi, about 1-2 two minutes. After successful connection, set a name and you can start using it.
Addition of AP hotspot
Connect the camera own wireless network to pair WI-FI.
1. Select Addition of AP hotspot, connect the camera to the power source, and wait for the camera to boot up, when the camera issues a voice prompt, click Next.
(If the camera does not support voice intercom, please check the indicator)
2. Click Go to Setting, connect your phone to the ‘CLOUDCAM_XXX‘ wifi, then go back to YCC365 PLUS and click Next.
3. Select your wifi and enter your wifi password, then click Confirm
4. Wait for the camera to connect to the wifi, about 1-2 two minutes. After successful connection, set a name and you can start using it.
Addition of Network cable
Only applicable for the device with the network cable socket
1. Connect the camera to the router with a network cable and connect it to the power supply, then wait for the camera to boot up and when it beeps, click Next.
2. Scan the QR code on the camera, which is usually on the bottom of the camera. The camera will be added after scanning.
Local connection to YCC365 PLUS Camera
Local connection You can use the YCC365 PLUS camera without internet connection.
1. In the Login or Mine screen, click Local direct connection.
2. Click ‘+’, select your camera, click Next.
3. Click Go To Setting, connect to CLOUDCAM_XXXX wifi, then return to YCC365 PLUS APP.
4. Enter the username and password of the camera to complete the connection.
Default username: admin , password: 12345
Camera Function Setting
You can share the camera to your family or friends.
1. Click the camera to enter the video screen, then select Share
2. Click ‘Add family member‘, then set a name and enter your family or friend’s YCC365 account to share.
Recording Settings
The camera needs a memory card to record video, please insert the memory card first.
Insert the memory card when the camera is off, otherwise the camera may not recognize the memory card.
1. Click the Settings icon > Memory card management
The camera recognizes the memory card will show the setting options, the default is Alarm recording, the camera will record only when motion is detected.
2. Click Recording mode to select the recording mode.
Select Continuous recording, the camera will be 24 hours continuous recording.
View Camera Recording
Click Playback and select Card playback. You can then view the video saved on the memory card.
The blue time indicates that there is video at the current time.
Mobile tracking settings
Open Intelligent tracking, the camera will follow the movement of the object.
PTZ Settings
You can save the camera’s moving position, so that the camera can quickly move to the specified location.
Click Save to save the current location, then enter the Presets page, you can see the saved location, click the picture The camera will automatically move to the specified location.
How to reset YCC365 PLUS camera?
When the YCC365 PLUS camera is offline, or change the wifi, you can reset the camera, after reset will be restored to factory settings.
Steps to reset the camera:
Make sure the camera is powered on, then find the reset button of YCC365 PLUS camera.
The reset button is usually on the bottom, head, and back of the camera.
Press and hold the reset button for about 5 seconds, the camera emits a ‘reset success’ voice prompt, it means the reset is successful.
The camera will restart after the reset, and then you can start connecting the camera.
How to download Micro SD card video to my phone?
Method 1:
1. Click on ‘Card playback’ to view the video, select the time you want to save, then click on the ‘
‘ icon, it will start recording, click once more ‘‘ to save the video to your phone.
2. You can find the saved video in Mine > Album page, click ‘Share’ to save it to your phone album.
Method 2:
If you need to save videos quickly and completely, you need to use Micro SD Card Reader to connect your phone.
To avoid video corruption, please remove the memory card when the camera is turned off.
FAQ
Did not hear the voice prompt?
- Ensure that the power supply of the device has been connected.
- Please tear off the protective film and use the QR code to configure the network
- Ensure that the distance between QR code and the device is 6-8 inches.
- Replace the other connection methods
This manual contains all the contents of YCC365 PLUS, how to add it, how to set up the functions of YCC365 PLUS cameras, etc. continuously updated.
This guide applies to YCC365 and YCC365 PLUS cameras.
YCC365 PLUS APP download
YCC365 PLUS supports Android and iPhone, you can download it from google play or app store.
Register your account and login
Log In Open the app, and log in with your YCC365 PLUS. If you don’t have an account, create one first.
How to connect YCC365 PLUS camera
YCC365 Plus camera has three connection methods, you can choose any one of them.
Scan code to add
Camera pair with Wi-Fi by scanning QR code on the mobile phone.
1. Click the ‘+’ icon, select Intelligent camera > Scan code to add
2. Connect the YCC365 Plus camera to the power supply, then wait for the camera to start, when the camera issues a voice prompt, click Next.
(If the camera does not support voice intercom, please check the indicator)
Note
If the camera does not issue a voice prompt, please reset the camera.
3. Enter your wifi password, and make sure your wifi name and password are correct, then click Next.
It is recommended to connect 2.4G wifi, some cameras only support 2.4G wifi, and 2.4G wifi distance is far.
4. Let the camera scan the displayed QR code, when the camera makes a ticking sound, it means the scan is successful, please click You hear a tone or the indicator light. (Did not hear the voice prompt?)
5. Wait for the camera to connect to the wifi, about 1-2 two minutes. After successful connection, set a name and you can start using it.
Addition of AP hotspot
Connect the camera own wireless network to pair WI-FI.
1. Select Addition of AP hotspot, connect the camera to the power source, and wait for the camera to boot up, when the camera issues a voice prompt, click Next.
(If the camera does not support voice intercom, please check the indicator)
2. Click Go to Setting, connect your phone to the ‘CLOUDCAM_XXX‘ wifi, then go back to YCC365 PLUS and click Next.
3. Select your wifi and enter your wifi password, then click Confirm
4. Wait for the camera to connect to the wifi, about 1-2 two minutes. After successful connection, set a name and you can start using it.
Addition of Network cable
Only applicable for the device with the network cable socket
1. Connect the camera to the router with a network cable and connect it to the power supply, then wait for the camera to boot up and when it beeps, click Next.
2. Scan the QR code on the camera, which is usually on the bottom of the camera. The camera will be added after scanning.
Local connection to YCC365 PLUS Camera
Local connection You can use the YCC365 PLUS camera without internet connection.
1. In the Login or Mine screen, click Local direct connection.
2. Click ‘+’, select your camera, click Next.
3. Click Go To Setting, connect to CLOUDCAM_XXXX wifi, then return to YCC365 PLUS APP.
4. Enter the username and password of the camera to complete the connection.
Default username: admin , password: 12345
Camera Function Setting
You can share the camera to your family or friends.
1. Click the camera to enter the video screen, then select Share
2. Click ‘Add family member‘, then set a name and enter your family or friend’s YCC365 account to share.
Recording Settings
The camera needs a memory card to record video, please insert the memory card first.
Insert the memory card when the camera is off, otherwise the camera may not recognize the memory card.
1. Click the Settings icon > Memory card management
The camera recognizes the memory card will show the setting options, the default is Alarm recording, the camera will record only when motion is detected.
2. Click Recording mode to select the recording mode.
Select Continuous recording, the camera will be 24 hours continuous recording.
View Camera Recording
Click Playback and select Card playback. You can then view the video saved on the memory card.
The blue time indicates that there is video at the current time.
Mobile tracking settings
Open Intelligent tracking, the camera will follow the movement of the object.
PTZ Settings
You can save the camera’s moving position, so that the camera can quickly move to the specified location.
Click Save to save the current location, then enter the Presets page, you can see the saved location, click the picture The camera will automatically move to the specified location.
How to reset YCC365 PLUS camera?
When the YCC365 PLUS camera is offline, or change the wifi, you can reset the camera, after reset will be restored to factory settings.
Steps to reset the camera:
Make sure the camera is powered on, then find the reset button of YCC365 PLUS camera.
The reset button is usually on the bottom, head, and back of the camera.
Press and hold the reset button for about 5 seconds, the camera emits a ‘reset success’ voice prompt, it means the reset is successful.
The camera will restart after the reset, and then you can start connecting the camera.
How to download Micro SD card video to my phone?
Method 1:
1. Click on ‘Card playback’ to view the video, select the time you want to save, then click on the ‘‘ icon, it will start recording, click once more ‘‘ to save the video to your phone.
2. You can find the saved video in Mine > Album page, click ‘Share’ to save it to your phone album.
Method 2:
If you need to save videos quickly and completely, you need to use Micro SD Card Reader to connect your phone.
To avoid video corruption, please remove the memory card when the camera is turned off.
FAQ
Did not hear the voice prompt?
- Ensure that the power supply of the device has been connected.
- Please tear off the protective film and use the QR code to configure the network
- Ensure that the distance between QR code and the device is 6-8 inches.
- Replace the other connection methods
Would you be kind enough to inform us what the rtsp /http /https URL format would be with the ports and credentials of the OR-101-5MP camera, What was posted at https://www.ycc365plus.com/en/ycc365-plus-camera-rtsp-url-address-and-port-number
does not work. thank you very much.
ive had my camera for a year now and now it doesnt recognize my sd card. ive tried different sd cards. ive reset the camera. ive deleted the camera from the app and the camera still doesnt recognize the micro sd card
Nu îmi mai pot accesa camerele de ceva vreme
My camera tracks horizontally, but not vertically. How do I correct this?
I found my camera recording is shorter than before. I could keep a few days of recordings in a 32Gb SD card , but now it can only keep 1 day of recording. Recently, I put a 64Gb SD in, however, it doesn’t make any longer recording.
my ycc365 was set ( i have 2 units) but my 2nd unit keeps giving me the problem that it does not recognize the memory card.
I put the card from 2nd unit into 1st and all is fine. i put another card that i know works in the problematic 2nd unit and it fails to read card. i reformatted with no success. in memory card management it says avaialble. why can i not see recordings?
Witam, nie wiem jaki czas ustawić zeby godzina była poprawna nie ma w opcjach ani Europejskiego ani Polski
My camera is not detecting the microSD card. It is a 64 GB class10 memory card, I tried to plug it in while the camera was offline and while it was online. The microSD card is working, I have tested it few times. What should I do? In what file system should the card be, FAT32, ExFAT or NTFS? What else should I try, change some setting in the app or I should try something with the camera itself?
You can try using a computer formatted memory card, FAT32 or ExFAT format.
If the memory card is still not recognised, there may be a problem with the camera or the memory card.
I can no longer reset and add my camera because the QR code has been scratched.
No QR code is required to connect the camera, please see the connection guide