Camera is only available to 2.4G routers, not 5G routers.
Please do not set hide functionality on your Wi- Fi router, or the device will not successfully configure with the Wi-Fi.
Please ensure the Wi-Fi router works normally, then confirm the . DHCP router.
Please reset the Wi- Fi router before configuring the device to get a better network environment.
Please follow the instructions carefully. Configure your home wireless network and don’t skip any of these steps , as this may cause device connection failure.
Hello, I understand that my camera must have a problem and that the AP connection is no longer possible. I will still try to add one key sounds device. Then I will try to change the name of my wifi, then try a new application. Finally I think I will have to buy a new CAMOUFLAGE SOLAR WIFI IP camera. Anyway, thank you very much for your patience and your help.
Hello, I confirm that the camera emits a voice after reset (press button for 5 secondes) ( I have difficulties to understand exactly )but i Think it is parmeters of factory. ) then A light blue flashing , but no voice said reset sucessfully. Then, I tried add the camera wih the mode ( Ajouter un periphérique one key (sons) after the reset but it Unfortunately . This camera has been bought in November 2019 but the seller doesn’t exist . The camera wifi is not found.
So I think this camera has à problem ? Thanks and regards .
Your camera is probably an older version, try adding it in this mode. English: (onekey add device(sounds)) French: (Ajouter un périphérique onekey (sons))
Confirm that the camera is reset before adding it, and the camera will emit a voice prompt if it is successfully reset.
Still not working, we recommend consulting your camera seller
SOLAR WIFI IP CAMERA Y4-M Offline APP Microshare Mycam Dear Sirs First of all, I send you my best wishes and Thank you again for your help.
I have followed your instructions and the instructions carefully. The camera flashes blue, but the camera’s WIFI cannot be found: offline.
Since I mistakenly deleted the BCM ID of the camera with the MYCAM app, it may not be recognized anymore, and it may not be possible to add it anymore?
Another question is it possible to add 2 cameras to a Microshare account?
Hello. Thanks for your answer. Y can’t find BCMXXXX wifi ? I dont why. I have reset the camera and wait aus specified, but nothing . I use 2.4 ghz and wpa/wpa2 an MYCAM APP. Is it because, i made a mistake as specified il my first message? I also scanned QR but not possible. Thanks for advance:
Hello, I allow myself to contact you in order to have your help for connecting my camera solar wif Y4-M. With android Smartphone Huawei . The seller no longer exists. Some days ago , The connexion of this camera was correct with method ap. The camera was on my wifi network. wiyh Microshare application. So It didnot work because wpa/wpa2. I have decide to modifie my network and reset the camera.
But in your application , I have make a mistaKe, I have deltel BCMXXXXX ? andnow it is not possible to connect my camera .
Y have this message: IMPOSSIBLE DE TROUVER LE WIFI AU DEBUT DE MYCAM BCM? I would appreciate your help, if possible.
I have one of this small box camera that uses mycam/microshare software. Is there any way to connect it to internal network without access to internet, because my intention was to use it in my intranet that have no internet access. I think I bought a wrong camera…
Bom dia, Tenho a câmera instalada no Brasil e moro na Europa, e não consigo conectar a aparece a mensagem “Internet desligada” e com isso, não consigo ver a imagem. Já me foi enviado o link do dispositivo e nada, já fiz tudo o que sabia.
Como posso fazer para conectar e obter as imagens?
We think the Samsung Pro Endurance is the best choice, designed for use in security cameras to help keep your video files safe, incredibly durable, and backed by a 3-year warranty.
Camapp365 is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.
I have a 4G camera (battery, not solar) and it won’t scan at all for me to add it
Hello, I understand that my camera must have a problem and that the AP connection is no longer possible.
I will still try to add one key sounds device. Then I will try to change the name of my wifi, then try a new application.
Finally I think I will have to buy a new CAMOUFLAGE SOLAR WIFI IP camera.
Anyway, thank you very much for your patience and your help.
Regards
Okay, you’re welcome.
Hello,
I confirm that the camera emits a voice after reset (press button for 5 secondes) ( I have difficulties to understand exactly )but i Think it is parmeters of factory. ) then A light blue flashing , but no voice said reset sucessfully.
Then, I tried add the camera wih the mode ( Ajouter un periphérique one key (sons) after the reset but it Unfortunately .
This camera has been bought in November 2019 but the seller doesn’t exist .
The camera wifi is not found.
So I think this camera has à problem ?
Thanks and regards
.
If your wifi is 2.4g and the password is correct.
Then yes, there may be a problem with the camera.
Your camera is an old version, there is no camera wifi, you can only add cameras by Ajouter un periphérique one key (sons)
I have just sent pictures by mail
Thanks
Your camera is probably an older version, try adding it in this mode.
English: (onekey add device(sounds))
French: (Ajouter un périphérique onekey (sons))
Confirm that the camera is reset before adding it, and the camera will emit a voice prompt if it is successfully reset.
Still not working, we recommend consulting your camera seller
SOLAR WIFI IP CAMERA Y4-M Offline APP Microshare Mycam
Dear Sirs
First of all, I send you my best wishes and Thank you again for your help.
I have followed your instructions and the instructions carefully.
The camera flashes blue, but the camera’s WIFI cannot be found: offline.
Since I mistakenly deleted the BCM ID of the camera with the MYCAM app, it may not be recognized anymore, and it may not be possible to add it anymore?
Another question is it possible to add 2 cameras to a Microshare account?
Thank you in advance, Regards
Hi,
If you can, please send me a picture of the camera and I will confirm which camera it is, it may help.
Yes, you can add more than one camera.
Hello. Thanks for your answer.
Y can’t find BCMXXXX wifi ? I dont why.
I have reset the camera and wait aus specified, but nothing . I use 2.4 ghz and wpa/wpa2 an MYCAM APP.
Is it because, i made a mistake as specified il my first message?
I also scanned QR but not possible.
Thanks for advance:
Only connect to the camera’s wifi can add cameras.
You can check the indicator status, the red light is flashing is ap hotspot mode.
The camera red light flashes, but can not find the wifi , may be the camera wifi problems.
Not red light flashing, may be not reset successfully, long press the reset button for 5 seconds, then the camera will automatically restart.
Specific indicator color to the supporting manual shall prevail.
Hello,
I allow myself to contact you in order to have your help for connecting my camera solar wif Y4-M. With android Smartphone Huawei .
The seller no longer exists.
Some days ago , The connexion of this camera was correct with method ap. The camera was on my wifi network. wiyh Microshare application.
So It didnot work because wpa/wpa2.
I have decide to modifie my network and reset the camera.
But in your application , I have make a mistaKe, I have deltel BCMXXXXX ? andnow it is not possible to connect my camera .
Y have this message: IMPOSSIBLE DE TROUVER LE WIFI AU DEBUT DE MYCAM BCM?
I would appreciate your help, if possible.
Many Thanks , and best regats
Hi, can’t find ‘ BCMXXXXX’ wifi
You need to reset the camera, then wait 1-2 minutes to find this wifi.
Also the camera supports wpa/wpa2, we suggest using mycam app.
Mycam show offline for few days and press button reset also show offline .
Its so stubborn. before it goes back on
line, its a hustle
Good Morning,
I have one of this small box camera that uses mycam/microshare software.
Is there any way to connect it to internal network without access to internet, because my intention was to use it in my intranet that have no internet access.
I think I bought a wrong camera…
Bom dia,
Tenho a câmera instalada no Brasil e moro na Europa, e não consigo conectar a aparece a mensagem “Internet desligada” e com isso, não consigo ver a imagem.
Já me foi enviado o link do dispositivo e nada, já fiz tudo o que sabia.
Como posso fazer para conectar e obter as imagens?
Hi,Hello, you can reset camera and reconnect